Shortcuts
|
|
NetComm NP727
|
details: | In-wall Wireless Access Point |
hardware type: | Wireless Access Point |
date added: | 2011-04-23 |
updated: | 2020-03-23 |
The NP727 In-Wall Wireless Access Point is designed to blend in with any home or office interior in a seamless manner. Once installed, it can distribute your Internet connection through the built in Wireless G, Ethernet port or a combination of both.
Its front panel features LED status indicators and an RJ-45 Ethernet LAN port. It supports Power over Ethernet (PoE) standard. Optionally the NP727 can also be powered via an AC adapter when a PoE switch is not available.
NP727 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
QoS: |
|
ToS / DiffServ: |
|
Routing Protocols: |
VLAN tagging (802.1q)
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Repeater mode
|
Receiver Sensitivity: |
-74 dBm |
Multiple SSID: |
|
WDS compatible: |
|
WMM (QoS): |
|
Device Management
|
Default IP address: |
192.168.27.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Usage Statistics: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2
|
NTP client: |
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
https://www.netcomm.com/ |
Manual: |
http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|