Shortcuts
|
 |
NetComm NP124
|
| details: | Wireless N Extender |
| hardware type: | Wireless Range Extender |
| date added: | 2011-08-09 |
| updated: | 2013-04-15 |
The NetComm Wireless N Extender combats weak wireless signals in the home or office. With its triple functionality (as Access Point, Wireless Bridge and Repeater), the NP124 is the perfect product to give users a massive wireless boost.
The NP124 is designed to connect directly into the wall. It features a WPS button and advanced wireless security options, such as WEP and WPA/WPA2 wireless encryption.
The NP124 Wireless N Extender supports the wireless 802.11b/g/n standards with one 10/100Base-T Ethernet port.
| NP124 Features |
| General
|
| Availability: |
currently available
|
| List price: |
$119 |
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
|
| internal antenna(s): |
2 |
| WPS (Wi-Fi Protected Setup): |
|
| Device Management
|
| Default IP address: |
192.168.20.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info
|
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
| Links
|
| Product page: |
http://www.netcommwireless.com/product/w... |
| Manual: |
http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
