NetComm NB11W DSL Wireless Router

Shortcuts

	NetComm NB11W
details:	VDSL2 / ADSL2+ Wireless Router
hardware type:	DSL Wireless Router
date added:	2010-06-09
updated:	2013-04-15

The NB11W is a Multi-DSL router that can support both ADSL2+ and VDSL2. VDSL2 is a newer standard and technology that is perfectly suitable for triple play (Video, Voice and Data) applications with up to 100 Mbps downstream and 60 Mbps downstream capability.

Four 10/100 Base-T Ethernet ports and optional USB host/device are integrated to provide wired LAN connectivity with an optional integrated 802.11g WiFi WLAN Access Point (AP) for wireless connectivity.

The NB11W is a cost effective solution, designed to meet the needs of ISPs and carriers that intend to use one DSL device to cover end users in different loop range areas.

All NetComm products

All DSL Wireless Routers

NB11W Features
General
Availability:	discontinued
List price:	$398
LAN / WAN Connectivity
WAN throughput:	100 Mbps
WAN throughput upstream:	60 Mbps
WAN ports:	1
WAN port(s) type:	DSL/ISDN/POTS connector (RJ-11)
LAN ports:	4
LAN ports type:	10/100 Base-TX (RJ-45)
LAN ports auto cross-over:
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
DHCP relay:
DNS proxy:
Dynamic DNS client:
QoS:
UPnP:
Transparent Bridging (IEEE 802.1d):
Routing Protocols:	RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) Spanning Tree Protocol (STP) VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
DSL
DSL compliance:	ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) VDSL (G.993.1) VDSL2 (G.993.2)
PPPoE client:
PPPoA client:
Wireless
Maximum Wireless Speed:	54 Mbps
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
WiFi modes:	Access point
Default SSID:	Wireless
WMM (QoS):
WMM-PS (QoS):
VPN
	IPSec
IPSec passthrough:
	L2TP
L2TP passthrough:
	PPTP
PPTP passthrough:
Firewall
Filtering:	IP Address filtering, MAC Address filtering, packet filtering
Device Management
Default IP address:	192.168.1.1
Default admin username:	admin
Default admin password:	admin
Administration:	Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard SSH TFTP (RFC 1350)
Firmware upgradeable:
Configuration backup/restore:
Event log:
Usage Statistics:
Diagnostic functions:
Misc hardware info
SNMP support:	SNMP v.2
Links
Product page:	http://www.netcommwireless.com/product/x...
Datasheet:	http://media.netcomm.com.au/public/asset...
Manual:	http://media.netcomm.com.au/public/asset...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: