N3G002W Features |
General
|
Availability: |
discontinued
|
List price: |
$248 |
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 3G USB modem |
USB port type: |
USB 2.0
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
DNS proxy: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering
|
WiFi modes: |
Access point
|
external antenna(s): |
1 |
ext antenna(s) removable ?: |
|
Antenna gain: |
2 dBi |
Transmit Power: |
+14 dBm |
Receiver Sensitivity: |
-72 dBm |
Default SSID: |
netcomm n3g series |
WDS compatible: |
|
WMM (QoS): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
|
Device Management
|
Default IP address: |
192.168.123.254 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Email alerts: |
|
Event log: |
|
Misc hardware info
|
RAM: |
32 Mb |
Flash Memory: |
4 Mb |
NTP client: |
|
Links
|
Product page: |
http://www.netcommwireless.com/product/3... |
Datasheet: |
http://media.netcomm.com.au/public/asset... |
Manual: |
http://media.netcomm.com.au/public/asset... |
Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |