| N3G001W Features |
| General
|
| Availability: |
discontinued
|
| Street price: |
$179
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
|
| external antenna(s): |
1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: |
2 dBi |
| Transmit Power: |
+14 dBm |
| Receiver Sensitivity: |
-72 dBm |
| Default SSID: |
default |
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, packet filtering
|
| Device Management
|
| Default IP address: |
192.168.123.254 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Misc hardware info
|
| Chipset: |
AMRISC20000 |
| RAM: |
32 Mb |
| Flash Memory: |
4 Mb |
| SNMP support: |
SNMP v.2
|
| Links
|
| Product page: |
http://www.netcommwireless.com/ |
| Datasheet: |
http://media.netcomm.com.au/public/asset... |
| Manual: |
http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |
