Shortcuts
|
 |
NetComm 3GT1WN
|
| details: | 3G T1 Travel Router |
| hardware type: | Travel Router |
| date added: | 2010-08-25 |
| updated: | 2013-04-15 |
NetComms 3G Travel Router t1 is a versatile and portable solution for wireless mobile broadband for the home, office or on the road. This device creates an instant Wireless N hotspot allowing you to share an Internet connection across multiple devices like smart phones, gaming consoles or other computers. With wireless data speeds of up to 150Mbps it is 300% faster than Wireless G technology.
Connection to the Internet is achieved through either a 3G USB modem or via a fixed line (DSL/Cable/Satellite) connection to the routers WAN port. The integrated Lithium-Ion battery delivers networking power for up to 5 hours in one power-charge-cycle, which means you can set up your own Wi-Fi network without searching for a power point.
Featuring automatic Internet failover, this device will keep you connected. In case the DSL/Cable/Satellite connection drops out, it activates the 3G connection. The WAN port can also be configured optionally as a LAN port for a wired connection to a network client.
The device also features advanced security such as VPN pass-through, a full complement of wireless security options and a built in firewall. The setup is simple via NetComms browser interface. The firmware can be updated via NetComms website to take advantage of upcoming features.
The router is compatible with all 3G/Next G TM/UMTS/ HSPA/ EV-DO/ USB modems from leading vendors.
| 3GT1WN Features |
| General
|
| Availability: |
discontinued
|
| List price: |
$169 |
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| USB port(s): |
1
for 3G USB modem |
| USB port type: |
USB 2.0
|
| Auto-failover connection: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
1 |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering
|
| Device Management
|
| Default IP address: |
192.168.20.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| Chipset: |
Ralink RT 3050 |
| RAM: |
32 Mb |
| Flash Memory: |
4 Mb |
| NTP client: |
|
| Links
|
| Product page: |
http://www.netcommwireless.com/product/3... |
| Datasheet: |
http://media.netcomm.com.au/public/asset... |
| Manual: |
http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
