| 3G29WN2 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN throughput: |
24 Mbps
|
| WAN ports: |
1
one SIM card slot |
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
1
for printers and storage devices |
| USB port type: |
USB 2.0
|
| Auto-failover connection: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
|
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
| WiFi modes: |
Access point
|
| external antenna(s): |
3 |
| 3G UMTS HSPA: |
UTMS/HSDPA/HSUPA |
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
packet filtering
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Telnet / CLI
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.2
|
| NTP client: |
|
| Print Server: |
|
| Links
|
| Product page: |
http://www.netcommwireless.com/product/3... |
| Manual: |
http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |
Shortcuts
