NetComm 3G17Wn Travel Router

Shortcuts

	NetComm 3G17Wn
details:	3G Wireless N150 Router
hardware type:	Travel Router
date added:	2010-06-07
updated:	2013-04-11

The NetComm 3G17Wn 3G Wireless Router allows you to share your 3G service with any wireless enabled desktop or laptop computers. Using a 3G USB modem you can now set up a wireless network to share internet access in areas where previously unavailable.

This router is compatible with all 3G/Next GTM/UMTS/ HSPA/ EV-DO/ USB modems. It ensures connectivity and business continuity with auto Internet failover from WAN port to 3G USB modem.

The integrated AP complies with IEEE 802.11n (draft) standard, providing wireless transmission speeds of up to 150Mbps. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.

The router provides VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.

All NetComm products

All Travel Routers

3G17Wn Features
General
Availability:	currently available
Street price:	$143
LAN / WAN Connectivity
WAN ports:	1
WAN port(s) type:	10/100 Base-TX (RJ-45)
WAN port auto cross-over:
LAN ports:	2
LAN ports type:	10/100 Base-TX (RJ-45)
LAN ports auto cross-over:
USB port(s):	1 for 3G USB modem
USB port type:	USB 2.0
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
Dynamic DNS client:
UPnP:
MAC Address clone:
Wireless
Maximum Wireless Speed:	150 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering
WiFi modes:	Access point
external antenna(s):	1
ext antenna(s) removable ?:
Antenna connector:	RP-SMA (Reverse SMA)
Antenna gain:	2 dBi
Multiple SSID:
WMM (QoS):
WPS (Wi-Fi Protected Setup):
VPN
	IPSec
IPSec passthrough:
	PPTP
PPTP passthrough:
Firewall
SPI firewall:
DoS / DDoS protection:
Filtering:	Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering
Device Management
Default IP address:	192.168.20.1
Default admin username:	admin
Default admin password:	admin
Administration:	Web-based (LAN) Quick Setup Wizard
Firmware upgradeable:
Event log:
Usage Statistics:
Misc hardware info
RAM:	32 Mb
Flash Memory:	8 Mb
NTP client:
Links
Product page:	http://www.netcomm.com.au/netcomm-produc...
Datasheet:	http://media.netcomm.com.au/public/asset...
Manual:	http://media.netcomm.com.au/public/asset...
Quick Install Guide:	http://media.netcomm.com.au/public/asset...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: