main shortcuts
|
|
Linksys WRE54G
|
details: | Wireless-G Range Expander |
hardware type: | Wireless Range Extender |
date added: | 2011-07-27 |
updated: | 2020-03-21 |
Unlike adding a traditional access point to your network to expand wireless coverage, the Wireless-G Range Expander does not need to be connected to the network by a data cable. Just put it within range of your main access point or wireless router and it will repeat the signal to remote wireless devices.
This "relay station" or "repeater" approach saves wiring costs and helps to build wireless infrastructure by driving signals into even those distant, reflective corners and hard-to-reach areas where wireless coverage is spotty and cabling is impractical.
Installation is a snap with the Range Expander's Auto Configuration button. Just plug it in and press the button. The Expander will find your wireless network and configure itself automatically.
WRE54G Features |
General
|
Availability: |
discontinued
|
Street price: |
$85 |
Warranty: |
3 year(s) |
LAN / WAN Connectivity
|
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
|
Wifi security/authentication: |
WEP WPA (TKIP) SSID Broadcast disable
|
WiFi modes: |
Repeater mode
|
Default SSID: |
linksys |
Device Management
|
Default IP address: |
192.168.1.240 |
Default admin username: |
(blank) |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Links
|
Product page: |
https://www.linksys.com/ |
Quick Install Guide: |
http://homedownloads.cisco.com/downloads... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|