| WAP54G Features |
| General
|
| Availability: |
discontinued
|
| List price: |
$100 |
| Street price: |
$63
|
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| Dynamic DNS client: |
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
|
| internal antenna(s): |
0 |
| external antenna(s): |
2 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-TNC (Reverse TNC)
|
| Default SSID: |
linksys |
| Multiple SSID: |
|
| WDS compatible: |
|
| Device Management
|
| Default IP address: |
192.168.1.245 |
| Default admin username: |
(blank) |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Windows application
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info
|
| Chipset: |
BCM4710, 125MHz |
| RAM: |
8 Mb |
| Flash Memory: |
2 Mb |
| SNMP support: |
SNMP v.1
|
| NTP client: |
|
| Third-party firmware support: |
DD-WRT |
| Notes: |
v.1.0, v.1.1 have 8Mb or 16Mb RAM, 2Mb or 4Mb flash memory; v.2.0, v.3.0 have 8Mb RAM, 2Mb flash memory |
| Links
|
| Product page: |
https://www.linksys.com/us/ |
| Datasheet: |
http://downloads.linksys.com/downloads/d... |
| Manual: |
http://downloads.linksys.com/downloads/u... |
