The Broadband Guide
SG
search advanced

Linksys WAG310G

details: Wireless-G ADSL2+ Gateway with VoIP
hardware type: VoIP Gateway
date added: 2010-01-31
updated: 2020-04-06
The WAG310G integrates an ADSL2+ modem, 802.11b/g wireless access point, five 10/100 Ethernet ports, two FXS ports for VoIP, one FXO port and a single USB 2.0 port. One of the LAN ports can be configured as WAN port.

The integrated wireless access point complies with the IEEE 802.11b/g standards, providing wireless transmission rates of up to 54Mbps. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.

This router supports a variety of VoIP features, such as Caller ID, Do Not Disturb (DND), Speed Dialing and Distinctive Ring.

The router features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.
 
 
 
 WAG310G Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 5
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for storage
 USB port type: USB 2.0
 RJ-11 FXS VoIP phone ports: 2
 RJ-11 FXO VoIP PSTN wall jack port: 1
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 VoIP
 VoIP Protocols: SIP v2 (RFC 3261)
RTP / RTCP (RFCs 1889/1890)
 VoIP Voice Features: Caller ID
Call waiting
Call forward
Speed Dialing
Distinctive Ring
Do Not Disturb (DND)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 1
 Multiple SSID: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
 Links
 Product page: https://www.linksys.com/us/
 Manual: http://downloads.linksys.com/downloads/u...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About