Shortcuts
|
 |
Linksys E1000
|
| details: | Wireless-N Router |
| hardware type: | Wireless Router |
| date added: | 2010-03-31 |
| updated: | 2017-01-28 |
The Linksys E1000 is a wireless broadband router with a single 10/100Mbps WAN port and four 10/100Mbps LAN ports.
The integrated access point complies with IEEE 802.11n, supports WEP and WPA/WPA2 wireless encryption. The E1000 uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
This router provides VPN pass-through for IPSec, L2TP and PPTP. It has a built-in SPI firewall that provides a reliable protection against hackers and malicious attacks.
The E1000 can be easily configured via Web-based configuration utility or by using the Cisco Connect software. It has three simple steps to get you set up a secure wireless network. An user-friendly interface allows you to choose from simple to advanced settings. In addition to a simple wireless network setup wizard, the Cisco Connect software includes parental controls (access time, websites) and allows for simple management of a separate, secure network for guests.
E1000 differs from higher-end E-Series routers in that it offers only single 2.4GHz band operation, and 100Mbps (as opposed to Gigabit) ports.
» Forums search for Linksys E1000
| E1000 Features |
| General
|
| Availability: |
currently available
|
| Release Date: |
2010-03-31 |
| List price: |
$59 |
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| MTU configurable (WAN): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
2 |
| Antenna gain: |
1 dBi |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Security log: |
|
| Filtering: |
IP Address filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Alternate Admin URL: |
http://my.e1000/ |
| Default admin username: |
(blank) |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Windows application
MAC application
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Links
|
| Product page: |
http://www.linksys.com/us/support-produc... |
| Datasheet: |
http://homedownloads.cisco.com/downloads... |
| Manual: |
http://homedownloads.cisco.com/downloads... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
