The Broadband Guide
SG
search advanced

Lancom L-452agn

details: 802.11n Dual Band Access Point
hardware type: Wireless Access Point
date added: 2012-12-12
updated: 2013-01-17
With its two radio modules offering 450 Mbps, this access point simultaneously serves clients in the 2.4- and 5-GHz bands. The LANCOM L-452agn dual Wireless detects interferences within its radio field and helps administrators with troubleshooting.

In combination with the 3x3 MIMO technology, this AP enables physical data rates of up to 450 Mbps per radio module. Numerous mechanisms, including STBC and LDPC, improve the reception conditions at the edge of a radio cell. The use of 40-MHz channels, packet
aggregation, and block acknowledgment significantly increase the available bandwidth and ensure the smooth operation of applications that place tough demands on performance.

The access point can be operated in standalone mode and managed with the free administration tools, or it can be centrally managed by a LANCOM WLAN controller.
 
 
 
 L-452agn Features
 General
 Availability: currently available
 Warranty: 3 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 1
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 ToS / DiffServ: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 900 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
 external antenna(s): 5
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Transmit Power: +15 dBm
 Receiver Sensitivity: -80 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 WMM-PS (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 VPN
  L2TP
 L2TP server: yes
 L2TP client: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, packet filtering
 Device Management
 Default IP address: 172.23.56.254
 Administration: Web-based (LAN)
Telnet / CLI
SSH
 Firmware upgradeable: yes
 Email alerts: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 SNMP support: SNMP v.2
 IPv6 support: yes
 NTP client: yes
 Power over Ethernet (PoE): yes
 Notes: The AP features one serial configuration interface / COM port (8 pin Mini-DIN)
 Links
 Product page: http://www.lancom-systems.de/en/products...
 Datasheet: http://www.lancom-systems.de/download/LC...
 Quick Install Guide: http://www.lancom-systems.de/download/LC...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About