Shortcuts
|
 |
Lancom L-320agn
|
| details: | Dual Band Wireless-N Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2012-12-13 |
| updated: | 2013-04-08 |
The LANCOM L-320agn is a 802.11n dual band access point with an integrated MIMO antenna which operates either in the 2.4 or 5-GHz band. As this access point features 802.3af Power over Ethernet, it can even be installed if no wall sockets are available.
The 802.11n standard includes several mechanisms such as MIMO, 40 MHz channels, packet aggregation, and block acknowledgement which significantly increase the
amount of bandwidth available for user applications.
A comprehensive range of security technologies is supported in wireless LAN including IEEE 802.11i, 802.1X, WPA, WPA2, WEP64/128/152, access control lists or LEPS (LANCOM Enhanced Passphrase Security), which enables the configuration of an optimized solution, whatever the individual requirements. Multiple SSID allows the definition of up to 8 user groups, each with its own level of security.
The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
| L-320agn Features |
| General
|
| Availability: |
currently available
|
| Warranty: |
3 year(s) |
| LAN / WAN Connectivity
|
| LAN ports: |
1 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
|
| Transmit Power: |
+17 dBm |
| Receiver Sensitivity: |
-80 dBm |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: |
Domain/URL blocking, packet filtering
|
| Device Management
|
| Default IP address: |
172.23.56.254 |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
SSH
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info
|
| SNMP support: |
SNMP v.2
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Notes: |
This AP features serial configuration interface / COM port (8 pin Mini-DIN) |
| Links
|
| Product page: |
http://www.lancom-systems.de/en/products... |
| Datasheet: |
http://www.lancom-systems.de/download/pr... |
| Manual: |
ftp://ftp.lancom.de/LANCOM-Releases/LC-L... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
