Shortcuts
|
 |
JAHT JPL-4001B2
|
| details: | Powerline Wireless Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2011-06-24 |
| updated: | 2020-03-15 |
The JPL-4001B2 is a Powerline wireless access point.
It ensures data security with a two-level encryption mechanism. Built with 128-bit WEP encryption for the wireless pass-through and further secured with 56-bit DES encryption for the powerline pass-through, you are guaranteed that your Internet traffic, e-mail, and other communication remain protected and private.
The installation is simple, all you need to do is just to plug the JPL-4001B2 into a power socket.
| JPL-4001B2 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
0 |
| Powerline Networking: |
HomePlug 1.0 (85Mbps, 56-bit DES)
|
| Router
|
| DHCP client: |
 |
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
Spanning Tree Protocol (STP)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
|
| internal antenna(s): |
1 |
| Antenna gain: |
2 dBi |
| Default SSID: |
default |
| WDS compatible: |
|
| Device Management
|
| Default IP address: |
10.0.0.3 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.jaht.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
