Shortcuts
|
|
Hitron HT-EMN2
|
details: | 802.11ac Network Extender |
hardware type: | Wireless Range Extender |
date added: | 2018-02-25 |
updated: | 2018-02-28 |
The HT-EMN2 comes with two F-type connectors. Simply connect HT-EMN2 to coaxial outlet, it should establish MoCA link automatically with the network. The device is now ready to use.
The HT-EMN2 integrates Wi-Fi 2T2R 802.11n 2.4GHz + 802.11ac 5GHz dual band concurrent MIMO Access Point, MoCA 2.0 and Giga Ethernet port.
The HT-EMN2 enables high-bandwidth traffic to be seamlessly distributed across the end-user's home or office.
The HT-EMN2 supports pre-configured and pre-enabled Wi-Fi security via WiFi Protected Setup (WPS), allowing the end-user to rapidly set up a secure wireless network without manual configuration.
HT-EMN2 Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN ports: |
2 |
WAN port(s) type: |
Coax F-connector
|
LAN ports: |
1 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
MoCA: |
MoCA 2.0 (400Mbps-800Mbps)
|
Wireless
|
Maximum Wireless Speed: |
1200 Mbps (Wi-Fi 5)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES)
|
WiFi modes: |
Access point
|
Multiple SSID: |
|
WMM (QoS): |
|
WMM-PS (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
MIMO: |
|
Dual Band (2.4GHz/5GHz): |
|
Simultaneous Dual Band (2.4GHz/5GHz): |
|
Device Management
|
Administration: |
Web-based (LAN) Remote configuration (WAN)
|
Firmware upgradeable: |
|
Event log: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2, SNMP v.3
|
Links
|
Product page: |
http://www.hitron-americas.com/product/h... |
Datasheet: |
http://www.hitron-americas.com/wp-conten... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|