
Shortcuts
|
 |
EnGenius / Senao M36
|
details: | Wireless Long range Mesh A/ Access Point/ Repeater/ WDS AP/ Mesh |
hardware type: | Wireless Access Point |
date added: | 2010-09-10 |
updated: | 2015-12-13 |
The M36 is a smoke detector looking Wireless Access Point / Universal Repeater/ WDS that operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and Super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards.
This AP is WDS compatible and supports up to four SSIDs. It uses WMM (QoS) to prioritize the traffic over the network.
This device can act as a DHCP client. It provides VPN pass-through for IPSec, L2TP and PPTP.
The M36 can be easily configured via Web-based configuration utility or via SNMP v.1/ v.2.
M36 Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
Routing Protocols: |
VLAN tagging (802.1q)
|
Wireless
|
Maximum Wireless Speed: |
108 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode
|
Antenna gain: |
4 dBi |
Transmit Power: |
+22 dBm |
Receiver Sensitivity: |
-74 dBm |
Multiple SSID: |
|
WDS compatible: |
|
WMM (QoS): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Usage Statistics: |
|
Diagnostic functions: |
ping, traceroute |
Misc hardware info
|
Chipset: |
Atheros AR2316, 180MHz |
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
SNMP support: |
SNMP v.1, SNMP v.2
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
http://www.senao.com/English/Default.asp... |
Datasheet: |
http://www.speedguide.net/images/hardwar... |
Manual: |
http://www.speedguide.net/images/hardwar... |
Quick Install Guide: |
http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|