| EAP-3660 Features |
| General
|
| Availability: |
currently available
|
| Street price: |
$92
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| QoS: |
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
|
| internal antenna(s): |
1 |
| Antenna gain: |
4 dBi |
| Transmit Power: |
+22 dBm |
| Receiver Sensitivity: |
-74 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| Chipset: |
Atheros AR2316, 180MHz |
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
| SNMP support: |
SNMP v.1, SNMP v.2
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.senao.com/English/Default.asp... |
| Datasheet: |
http://www.senao.com/images/www.senao.co... |
| Manual: |
http://www.senao.com/images/www.senao.co... |
| Quick Install Guide: |
http://www.senao.com/images/www.senao.co... |
