| ENXWI-2AN42 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
5 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
Wireless client
Repeater mode
|
| external antenna(s): |
2 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Antenna gain: |
2 dBi |
| Transmit Power: |
+15 dBm |
| Receiver Sensitivity: |
-70 dBm |
| Default SSID: |
default |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management
|
| Default IP address: |
192.168.10.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links
|
| Product page: |
http://www.encore-usa.com/us/product/ENX... |
| Datasheet: |
http://www.encore-usa.com/us/sites/defau... |
| Manual: |
http://file.encore-usa.com/misc/product/... |
| Quick Install Guide: |
http://file.encore-usa.com/misc/product/... |
Shortcuts
