ENHWI-2AN34D Features |
General
|
Availability: |
currently available
|
Street price: |
$35 |
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
MAC Address clone: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable
|
WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode
|
external antenna(s): |
2 |
Antenna gain: |
4 dBi |
Transmit Power: |
+15 dBm |
Receiver Sensitivity: |
-70 dBm |
Multiple SSID: |
|
WDS compatible: |
|
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering
|
Device Management
|
Default IP address: |
192.168.0.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Misc hardware info
|
Chipset: |
Ralink RT3052 |
RAM: |
32 Mb |
Flash Memory: |
4 Mb |
NTP client: |
|
Links
|
Product page: |
http://www.encore-usa.com/us/product/ENH... |
Datasheet: |
http://www.encore-usa.com/us/sites/defau... |
Manual: |
http://file.encore-usa.com/misc/product/... |