Shortcuts
|
 |
Encore ENDSL-A2+WIG2
|
| details: | ADSL2+ Modem with Wireless Ethernet Router |
| hardware type: | DSL Wireless Router |
| date added: | 2009-11-11 |
| updated: | 2020-04-07 |
The ENDSL-A2+WIG2 is an ADSL1/2/2+ wireless router with one RJ-11 WAN port and four 10/100Mbps LAN ports. It provides WAN throughput of up to 24Mbps.
The integrated access point complies with the IEEE 802.11b/g standards and uses WMM (QoS) to prioritize the traffic over the network. It supports WEP and WPA/WPA2 wireless encryption.
This router supports VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
| ENDSL-A2+WIG2 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN throughput: |
24 Mbps
|
| WAN throughput upstream: |
1 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
|
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
|
| external antenna(s): |
1 |
| Transmit Power: |
+15 dBm |
| Receiver Sensitivity: |
-60 dBm |
| Default SSID: |
Default_WLAN |
| Multiple SSID: |
|
| WMM (QoS): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Security log: |
|
| Filtering: |
IP Address filtering
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
trendchip |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping |
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| NTP client: |
|
| Links
|
| Product page: |
https://www.encorenetworks.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
