The Broadband Guide
SG
search advanced

Edimax EW-7428HCn

details: N300 High Power Ceiling Mount Wireless Range Extender/Access Point
hardware type: Wireless Access Point
date added: 2012-09-26
This Edimax wireless access point is a high-speed solution that complies with IEEE 802.11b/g/n standards. The latest wireless MIMO (multiple-input and multiple-output) technology is built into this access point to broaden its Wi-Fi coverage and to eliminate dead spots within the signal range. When it is connected to IEEE 802.11n wireless devices, this Edimax wireless access point can reach Wi-Fi speeds of up to 300Mbps.

The WDS (Wireless Distributed System) function let this access point acts as a wireless LAN access point and repeater at the same time.

The Edimax EW-7428HCn features a convenient WPS button. Users can set up an encrypted wireless connection simply by pressing the WPS button on this access point and the client device. This one-press WPS button helps users set up a secure wireless network in less than a minute.

The Edimax EW-7428HCn integrates a PoE PD module, and also provides a power jack for a regular power adapter. Users can connect the access point to either a PoE Switch or a power adapter for the power supply.
 
 
 
 EW-7428HCn Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 DHCP server: yes
 DHCP client: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 internal antenna(s): 2
 Transmit Power: +24 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Device Management
 Default IP address: 192.168.2.2
 Default admin username: admin
 Default admin password: 1234
 Administration: Web-based (LAN)
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
 Misc hardware info
 NTP client: yes
 Power over Ethernet (PoE): yes
 Links
 Product page: http://www.edimax.com/en/produce_detail....
 Datasheet: http://www.edimax.com/images/Image/datas...
 Manual: http://www.edimax.com/images/Image/manua...
 Quick Install Guide: http://www.edimax.com/images/Image/QIG/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About