Shortcuts
|
 |
Edimax EW-7303APn V2
|
| details: | N150 Outdoor Range Extender/Access Point with Built-in 12dBi Antenna |
| hardware type: | Wireless Access Point |
| date added: | 2013-06-18 |
| updated: | 2013-09-29 |
The Edimax EW-7303APn V2 is an outdoor range extender/access point that complies with wireless 802.11b/g/n standards and features Wi-Fi coverage range of over 1 kilometer. When connected to wireless 802.11n compatible devices, the EW-7303APn V2 can achieve transmission rates of up to 150Mbps.
The high power performance of the EW-7303APn V2 is complimented by a built-in 12dBi directional panel antenna. This high-gain antenna not only increases the transmission distance, but also stabilizes the wireless signal. Additionally, the EW-7303APn V2 is designed with an SMA connector that enables the user to connect external antennas to the range extender/access point.
The Edimax EW-7303APn V2 can be configured to operate in four modes: AP mode, WDS mode, WDS with AP mode, and repeater mode.
| EW-7303APn V2 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
WISP mode
|
| internal antenna(s): |
1 |
| external antenna(s): |
1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Antenna gain: |
12 dBi |
| Transmit Power: |
+17 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Device Management
|
| Default IP address: |
192.168.2.1 |
| Default admin username: |
admin |
| Default admin password: |
1234 |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Misc hardware info
|
| RAM: |
32 Mb |
| Flash Memory: |
4 Mb |
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.edimax.com/en/produce_detail.... |
| Datasheet: |
http://www.edimax.com/images/Image/datas... |
| Manual: |
http://www.edimax.com/images/Image/manua... |
| Quick Install Guide: |
http://www.edimax.com/images/Image/QIG/W... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
