The Broadband Guide
SG
search advanced

Edimax EW-7228APn

details: 150Mbps Wireless 802.11 b/g/n Range Extender / Access Point
hardware type: Wireless Access Point
date added: 2011-02-13
updated: 2012-08-27
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11b/g/n wireless LAN, this wireless LAN Range Extender/Access Point can let your wireless LAN client stations access both the wired and the wireless network nodes.

The Universal Repeater Mode lets this Range Extender/Access Point extend the coverage and signal strength for the current wireless environment. This standardized function is compatible with other wireless APs and Routers.

Except for the basic security control by using ESSID and 64/128 bit key length WEP encryption, the EW-7228APn also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES and hide ESSID.

The EW-7228APn allows you to configure this Range Extender/Access Point through the friendly Web user interface with a browser.
 
 
 
 EW-7228APn Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 5
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 DHCP server: yes
 DHCP client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Device Management
 Default IP address: 192.168.2.1
 Default admin username: admin
 Default admin password: 1234
 Administration: Web-based (LAN)
Quick Setup Wizard
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Misc hardware info
 RAM: 16 Mb
 Flash Memory: 2 Mb
 Links
 Product page: http://www.edimax.com/en/produce_detail....
 Datasheet: http://www.edimax.com/images/Image/datas...
 Manual: http://www.edimax.com/images/Image/manua...
 Quick Install Guide: http://www.edimax.com/images/Image/QIG/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About