Edimax BR-6428HPn Wireless Router

Shortcuts

	Edimax BR-6428HPn
details:	N300 High Power Wireless Broadband Router
hardware type:	Wireless Router
date added:	2012-11-06
updated:	2012-11-08

The Edimax BR-6428HPn is a high-speed solution that complies with IEEE 802.11b/g/n standards. When connected to wireless 802.11n compatible devices, the BR-6428HPn can achieve transmission rates of up to 300Mbps on the 2.4GHz band.

The BR-6428HPn's high power design enhance wireless output power to 27dbm (500mW), giving coverage range which is double that of standard 11n routers. The fine-tuned performance of the BR-6428HPn significantly reduces dead zones.

iQ Setup is a smart feature of Edimax routers that allows even the most inexperienced users to set up an Edimax router quickly and effortlessly.

The Edimax BR-6428HPn allows users to build secure connections with WPS enabled wireless devices simply by pressing the WPS button, eliminating the need to go through the hassle of setting up and configuring the security of your wireless network.

All Edimax products

All Wireless Routers

BR-6428HPn Features
General
Availability:	currently available
LAN / WAN Connectivity
WAN ports:	1
WAN port(s) type:	10/100 Base-TX (RJ-45)
WAN port auto cross-over:
LAN ports:	4
LAN ports type:	10/100 Base-TX (RJ-45)
LAN ports auto cross-over:
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
Dynamic DNS client:
UPnP:
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES)
WiFi modes:	Access point Wireless client Wireless bridge (PtP) Repeater mode
external antenna(s):	2
ext antenna(s) removable ?:
Antenna gain:	5 dBi
Transmit Power:	+23 dBm
Receiver Sensitivity:	-75 dBm
WDS compatible:
WPS (Wi-Fi Protected Setup):
VPN
	IPSec
IPSec passthrough:
	PPTP
PPTP passthrough:
Firewall
SPI firewall:
DoS / DDoS protection:
Filtering:	Domain/URL blocking, IP Address filtering, MAC Address filtering
Device Management
Default IP address:	192.168.2.1
Default admin username:	admin
Default admin password:	1234
Administration:	Web-based (LAN) Remote configuration (WAN)
Firmware upgradeable:
Configuration backup/restore:
Event log:
Usage Statistics:
Misc hardware info
RAM:	16 Mb
Flash Memory:	4 Mb
Links
Product page:	http://www.edimax.com/en/produce_detail....
Datasheet:	http://www.edimax.com/images/Image/datas...
Manual:	http://www.edimax.com/images/Image/manua...
Quick Install Guide:	http://www.edimax.com/images/Image/QIG/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: