The Broadband Guide
SG
search advanced

Edimax AR-7167WnA

details: 150Mbps Wireless ADSL2/2+ Router
hardware type: DSL Wireless Router
date added: 2011-09-30
updated: 2014-09-23
The Edimax AR-7167WnA/B is a high performance router that supports the ADSL2+ and 802.11n standards. Its advanced MIMO technology provides users up to 6 times better wireless data transmission rates (up to 150Mbps) and 3 times better signal coverage when compared to standard 802.11g/b routers.

It can allow for network speeds of up to 24Mbps downstream and 1Mbps upstream. Its IP sharing capability allows users to share a single ADSL connection with up to 253 wired or wireless client devices.

The Edimax AR-7167WnA/B features a convenient WPS button. Users can set up an encrypted wireless connection simply by pressing the WPS button on this router and the client device.
 
 
 
 AR-7167WnA Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Routing Protocols: VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 1
 Antenna gain: 3 dBi
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.2.1
 Default admin username: admin
 Default admin password: 1234
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 RAM: 32 Mb
 Flash Memory: 4 Mb
 NTP client: yes
 Links
 Product page: http://www.edimax.co.uk/en/produce_detai...
 Manual: http://www.edimax.co.uk/images/Image/man...
 Quick Install Guide: http://www.edimax.co.uk/images/Image/QIG...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About