The Broadband Guide
search advanced
 forgot password?

Dynamode R-ADSL411N

details: 802.11n 300Mbps Wireless Router with ADSL2+ Modem
hardware type: DSL Wireless Router
date added: 2011-03-09
updated: 2012-08-27
The ADSL2+ Wireless Router is a high-speed ADSL2+ Ethernet/Wireless router that
is designed to connect to the Internet and to directly connect to your local area
network (LAN) via high-speed 10/100 Mbps Ethernet, or wireless LAN (WLAN).

The R-ADSL411N is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24Mbps downstream and 1.5Mbps upload speeds.

The DSL router supports wireless 802.11b/g/n (draft 2.0), as well as WEP, WPA, WPA2, and 802.1x security protocols. A WPS button allows for easy wireless security configuration.
 R-ADSL411N Features
 Availability: currently available
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for storage devices
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 QoS: yes
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 external antenna(s): 2
 WPS (Wi-Fi Protected Setup): yes
 IPSec passthrough: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, date/time scheduling
 Device Management
 Default IP address:
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
 Firmware upgradeable: yes
 Event log: yes
 Misc hardware info
 SNMP support: SNMP v.2
 Product page:

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
by Humph - 2012-02-16 05:02
Please note that the default IP address for this router is actually

Anyone having problems loading webpages may need to adjust their MTU setting - this cannot be done with the version 1.0.0 firmware; you need to download and install the latest version of the firmware (version 1.0.2 at time of posting) from the following location:

Hope this helps someone - it took me ages to figure it out, and my email to dynamode technical support was totally ignored.
by Philip - 2012-02-19 12:33
Thank you for sharing this information !
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About