Shortcuts
|
 |
DrayTek Vigor2765ax
|
| details: | 3000Mbps VDSL2 35b Supervectoring VPN Router |
| hardware type: | DSL Wireless Router |
| date added: | 2023-05-01 |
| updated: | 2023-06-22 |
Vigor2765ax is a VDSL2 35b supervectoring modem, a firewall, and a VPN router. The router has 4x GbE LAN port, one of which is switchable to be a backup WAN interface. Thanks to 802.11ax technology, the router delivers link rate up to 3 Gbps.
It's highly configurable for an abundance of features including web content filtering, bandwidth limit, QoS and lots more, perfect for professional users who would like to take full control of the network.
The accelerator supports up to 2k NAT and routing connections, providing firewall performance up to 940Mbps on either Ethernet or DSL WAN (G.fast), while still meeting high expectation of QoS quality.
Use VPN (Virtual Private Network) to build a secure and private tunnel from the LAN of Vigor2765ax to the remote offices and teleworkers over the Internet.
The free DDNS service for you to access the router by a fixed hostname of your choice.
Filter web pages by URL keyword or web category to block access to insecure or inappropriate contents.
Proactive Roaming:
WiFi clients automatically hand-off to another AP/Router with a better signal strength when moving around in an area with multiple APs/Routers. However, WiFi clients sometimes stick to the AP/Router with weak signal, and not switching to the one with better signal.
Assisted Roaming:
VigorAP will disassociate the WiFi clients who are out of the effective transmission range, forcing them to pick up another AP/Router with a stronger signal.
Stronger Signal Guaranteed:
Furthermore, with "Minimum RSSI with Adjacent AP" option, VigorAP can disassociate the client only when other AP/router has a stronger wireless signal, and keep client stayed when there's no other AP/Router nearby.
OFDMA splits a single transmission into groups of subcarriers, and each subcarrier can be used by different client. With multiple clients transmitting simultaneously in the same channel, it improves efficiency of every single transmission opportunity and thus increases the wireless experiences in high density environment.
| Vigor2765ax Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN throughput: |
600 Mbps
|
| WAN ports: |
1
one of the LAN ports can act as a WAN port as well |
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
2
|
| USB port type: |
USB 2.0
|
| Auto-failover connection: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
VDSL (G.993.1)
VDSL2 (G.993.2)
Self-FEXT cancellation (G.993.5)
Improved impulse noise protection (G.998.4)
|
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless
|
| Maximum Wireless Speed: |
3000 Mbps (Wi-Fi 5)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
802.11ax (Wi-Fi 6)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
WPA3
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
|
| WiFi modes: |
Access point
Repeater mode
|
| external antenna(s): |
2 |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Band steering: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN
|
| VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), SHA2, IKE (IPSec) Key Management
|
| VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| DoS / DDoS protection: |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Telnet / CLI
SSH
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2, SNMP v.3
|
| IPv6 support: |
|
| Links
|
| Product page: |
https://www.draytek.com/products/vigor27... |
| Datasheet: |
https://fw.draytek.com.tw/Vigor2765/Docu... |
| Manual: |
https://fw.draytek.com.tw/Vigor2765/Manu... |
| Quick Install Guide: |
https://www.draytek.com/assets/online_ma... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
