main shortcuts
|
|
DrayTek Vigor2762
|
details: | VDSL2/ADSL2+ VPN Router for Home/SOHO |
hardware type: | DSL Router |
date added: | 2019-04-18 |
updated: | 2019-05-11 |
Vigor2762 series is a VDSL2 router equipped with 4 GbE LAN ports, one of which is switchable to a backup WAN interface. Highly configurable for an abundance of features including web content filtering, bandwidth limit, QoS and lots more.
The embedded VPN connections can allow family members to utilize ultimate broadband performance to realize home office.
The Gigabit Ethernet WAN port optimizes the throughput performance and flexibility for time-critical console gaming, multimedia streaming and P2P downloading.
Bandwidth Management allows you to prevent one device using all the bandwidth by bandwidth limit policy, session limit policy, and QoS settings.
The users of your connected PCs can use Web Portal Log-in and Bulletin Board to remind each other. The content security management (CSM) prevents your family or home office from unwanted web sites/access.
Vigor2762 Features |
General
|
Availability: |
currently available
|
Street price: |
$140 |
LAN / WAN Connectivity
|
WAN throughput: |
100 Mbps |
WAN ports: |
1 one of the LAN ports can be used as a WAN port; 2 USB ports for 3G/4G USB modems |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
2 for printers, storage devices and 3G/4G USB modem |
USB port type: |
USB 2.0
|
Auto-failover connection: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
Dynamic DNS client: |
|
QoS: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M) VDSL (G.993.1) VDSL2 (G.993.2) Improved impulse noise protection (G.998.4)
|
PPPoE client: |
|
PPPoA client: |
|
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), SHA2, IKE (IPSec) Key Management
|
VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
|
IPSec |
IPSec passthrough: |
|
IPSec simultaneous tunnels: |
2 |
IPSec throughput: |
60 Mbps |
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering, Cookie
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Email alerts: |
|
Event log: |
|
Diagnostic functions: |
|
Misc hardware info
|
Max clients: |
30 |
SNMP support: |
SNMP v.2, SNMP v.3
|
IPv6 support: |
|
Print Server: |
|
Links
|
Product page: |
https://www.draytek.com/products/vigor27... |
Datasheet: |
https://www.draytek.com.tw/ftp/Vigor2762... |
Manual: |
https://www.draytek.com.tw/ftp/Vigor2762... |
Quick Install Guide: |
https://www.draytek.com.tw/ftp/Vigor2762... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|