The Broadband Guide
SG
search advanced

Digicom Michelangelo VoIP 2

details: VoIP ADSL2+ Router
hardware type: VoIP Gateway
date added: 2011-03-02
updated: 2020-03-23
Michelangelo VoIP 2 supports ADSL2/2+ for Internet access at up to 12/24 Mbps and integrates VoIP functionality based on the SIP protocol for a better interoperability with Telecom Operators and other VoIP equipment.

Equipped with two FXS ports (for analog phones), the router is able to make two VoIP calls at the same time. A FXO port is also available for emergency calls and for backup over PSTN in case the ADSL or VoIP service is unavailable.

Michelangelo VoIP 2 supports supplementary voip services like Call Hold, Caller ID and Call Diversion.

A 54Mbps Wireless Access Point with WPA-PSK, WPA2-PSK and WEP 64/128bit encryption is integrated for secure radio transmissions. The built-in Stateful Packet Inspection Firewall guarantees secure accesses and protects your PC from external attacks.
 
 
 
 Michelangelo VoIP 2 Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 RJ-11 FXS VoIP phone ports: 2
 RJ-11 FXO VoIP PSTN wall jack port: 1
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 VoIP
 VoIP Protocols: SIP v2 (RFC 3261)
T.38 (Fax over IP)
 VoIP Audio Codecs: G.711 (PCM)
G.723.1
G.726
G.729 (a/b)
 VoIP Voice Features: Echo Cancellation (G.165/G.168)
Caller ID
Voice Activity Detection (VAD)
Comfort Noise Generator (CNG)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 WDS compatible: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
 Firmware upgradeable: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.digicom.it/digisit/prodotti.n...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About