Shortcuts
|
 |
D-Link DWL-2200AP
|
| details: | High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point With PoE |
| hardware type: | Wireless Access Point |
| date added: | 2010-08-03 |
| updated: | 2015-11-08 |
With improved signal rates of up to 108Mbps, the AirPremier Access Point allows network administrators to deploy a highly manageable and robust wireless network. This high-speed Access Point has integrated 802.3af Power over Ethernet (PoE) support to allow installation in areas where power outlets are not readily available.
The AirPremier Wireless Access Point provides maximum wireless security by supporting both Personal and Enterprise variants of both WPA-2 (Wi-Fi Protected Access 2) and WPA for optimal data protection. Other security features included in this Access Point are MAC Address Access Control Lists (ACL), Wireless LAN segmentation, SSID Broadcast Disable, and support for Advanced Encryption Standard (AES).
the AirPremier 802.11g Access Point with PoE can be configured in any of three modes: Access Point, Wireless Distribution System (WDS), and WDS with AP Mode. WDS with AP mode allows you to simultaneously utilize the DWL-2200AP as an Access Point to connect client devices (notebooks, computers, printers), and serve as the wireless network backbone. The DWL-2200AP also includes advanced features such as load balancing, which optimizes high network traffic volume and redundancy for fail-safe wireless connectivity.
Network administrators can manage all the settings via the Web-based configuration utility or with Telnet. For advanced network management, administrators can use D-Link's AP Manager or D-View SNMP management module to configure multiple access points from a single location.
| DWL-2200AP Features |
| General
|
| Availability: |
discontinued
|
| Street price: |
$139
|
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP server: |
|
| DHCP client: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| external antenna(s): |
1 |
| Antenna gain: |
5 dBi |
| Receiver Sensitivity: |
-73 dBm |
| Default SSID: |
default |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Device Management
|
| Default IP address: |
192.168.0.50 |
| Default admin username: |
admin |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
|
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.3
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.dlink.com/ |
| Quick Install Guide: |
ftp://ftp.dlinkla.com/pub/DWL-2200AP/QIG... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
