main shortcuts
|
 |
D-Link DSL-526B
|
| details: | ADSL2+ Ethernet/USB Combo Modem Router |
| hardware type: | DSL Router |
| date added: | 2010-02-12 |
| updated: | 2015-11-08 |
The DSL-526B is an ADSL2/2+ router with one RJ-11 WAN port, one 10/100Mbps LAN port and a single USB 1.1 port. It provides WAN throughput of up to 24Mbps.
This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against intruders and Denial of Service (DoS) attacks.
The router can be easily configured via Web-based configuration utility or via Telnet/CLI.
Intended for the Australian/European markets.
| DSL-526B Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN throughput: |
24 Mbps
|
| WAN throughput upstream: |
2 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
1
client PCs |
| USB port type: |
USB 1.1
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
|
| PPPoE client: |
|
| PPPoA client: |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
SSH
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.dlink.com.au/home-solutions/d... |
| Datasheet: |
http://files.dlink.com.au/Products/DSL-5... |
| Manual: |
ftp://files.dlink.com.au/products/DSL-52... |
| Quick Install Guide: |
ftp://files.dlink.com.au/products/DSL-52... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
