The Broadband Guide
SG
search advanced

D-Link DSL-2740B

details: RangeBooster N ADSL/ADSL2/2+ Modem Router
hardware type: DSL Wireless Router
date added: 2010-02-10
updated: 2015-11-08
The DSL-2740B is a wireless ADSL2/2+ router with one RJ-11 WAN port and four 10/100Base-T LAN ports. It provides WAN throughput of up to 24Mbps.

The integrated access point complies with IEEE 802.11n standard, providing wireless transmission speeds of up to 270Mbps. It is WDS compatible and supports WEP and WPA/WPA2 wireless encryption. The DSL-2740B uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.

This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network from intruders and Denial of Service (DoS) attacks.

The D-Link DSL-2740B is intended for the Australian market.
 
 
 
 DSL-2740B Features
 General
 Availability: discontinued
 Street price: $145
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Routing Protocols: IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
 Multiple SSID: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Intrusion Detection System (IDS): yes
 Security log: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering, date/time scheduling
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
SSH
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.dlink.com.au/products/?pid=78...
 Datasheet: ftp://files.dlink.com.au/products/DSL-27...
 Manual: ftp://files.dlink.com.au/products/DSL-27...
 Quick Install Guide: ftp://files.dlink.com.au/products/DSL-27...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About