Shortcuts
|
 |
D-Link DAP-3220
|
| details: | Wireless 108G Exterior Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2010-07-30 |
| updated: | 2015-11-01 |
The DAP-3220 is designed to handle a wide variety of outdoor environments. It has a die-cast watertight housing, a built-in heater and a temperature sensor. Supporting 802.3af Power over Ethernet (PoE), it can be placed at outdoor locations where power outlets are not easily accessible. Besides functioning as an AP, this device can be can be configured to operate as a Wireless Distribution System (WDS) to act as a bridge for linking together networks in different buildings.
This AP is capable of operating in one of four different operation modes to meet your wireless networking needs: access point; WDS with AP, WDS or wireless client.
The DAP-3220 supports 64/128/152-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders' access to the internal network.
Network administrators can manage DAP-3220 settings via web-based configuration or Telnet. Administrators can use a Windows-based utility called AP Manager to automatically locate all wireless devices installed on the network and do bulk configuration of multiple AP to save time and effort.
| DAP-3220 Features |
| General
|
| Availability: |
discontinued
|
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
|
| internal antenna(s): |
1 |
| Antenna gain: |
9 dBi |
| Transmit Power: |
+17 dBm |
| Receiver Sensitivity: |
-66 dBm |
| Default SSID: |
dlink |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Device Management
|
| Default IP address: |
192.168.0.50 |
| Default admin username: |
admin |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Telnet / CLI
SSH
Windows application
|
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.3
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://us.dlink.com/ |
| Datasheet: |
http://global.dlink.com.sg/site_pdtpdfs/... |
| Manual: |
http://global.dlink.com.sg/site_support/... |
| Quick Install Guide: |
http://global.dlink.com.sg/site_support/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
