Shortcuts
|
|
CyberGuard SG565
|
details: | Wireless Security & Data Access Appliance |
hardware type: | Firewall |
date added: | 2006-02-15 |
updated: | 2013-05-31 |
SG565 is an all-in-one wired or wireless workgroup security and data access appliance. Not only does it provide a wireless access point with secure Internet access and site-site access to the central office, it also supports network attached file storage and network printing - all in one appliance.
The SG565 includes industry-standard secure VPN access methods (IPSec, PPTP, L2TP) with hardware-accelerated encryption.
SG565 Features |
General
|
Availability: |
discontinued
|
Warranty: |
1 year(s) |
LAN / WAN Connectivity
|
WAN throughput: |
120 Mbps |
WAN ports: |
1 |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
USB port(s): |
1 |
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port forwarding of ranges: |
|
DHCP server: |
|
DHCP client: |
|
DNS proxy: |
|
QoS: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) BGP (RFC 1771) OSPF (RFC 1247)
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
|
Wifi security/authentication: |
WEP WPA (TKIP)
|
WiFi modes: |
Access point
|
external antenna(s): |
2 |
Receiver Sensitivity: |
-15 dBm |
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management
|
VPN Encryption: |
RC4 (40-bit), RC4 (128-bit), DES (56-bit), 3DES (168-bit), AES (128-bit)
|
|
IPSec |
IPSec server: |
|
IPSec client: |
|
IPSec simultaneous tunnels: |
150 |
IPSec throughput: |
35 Mbps |
|
L2TP |
L2TP server: |
|
L2TP client: |
|
|
PPTP |
PPTP server: |
|
PPTP client: |
|
PPTP passthrough: |
|
PPTP simultaneous tunnels: |
25 |
PPTP throughput: |
7 Mbps |
Firewall
|
ICSA-certified: |
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Security log: |
|
Device Management
|
Default IP address: |
192.168.0.1 |
Default admin username: |
root |
Default admin password: |
default |
Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI SSH SSL secure web Remote centralized management
|
Firmware upgradeable: |
|
Event log: |
|
Misc hardware info
|
RAM: |
64 Mb |
Flash Memory: |
16 Mb |
SNMP support: |
SNMP v.2
|
NTP client: |
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
http://www.cyberguard.com.my/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|