| CT-5369 Features |
| General
|
| Availability: |
discontinued
|
| Warranty: |
2 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
|
| WiFi modes: |
Access point
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
IP Address filtering, MAC Address filtering, packet filtering
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
root |
| Default admin password: |
12345 |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
SSH
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.2
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.comtrend.com/cgi-bin/na/db-se... |
| Datasheet: |
http://www.comtrend.com/na/dbase/upload/... |
