Cisco WAP321 Wireless Access Point

Shortcuts

	Cisco WAP321
details:	Wireless-N Selectable-Band Access Point with PoE
hardware type:	Wireless Access Point
date added:	2012-04-12
updated:	2012-08-21

Built specifically for small businesses, the Cisco WAP321 offers selectable-band 802.11n wireless technology to deliver high throughput and extended range throughout your office. Advanced quality-of-service (QoS) features let you prioritize traffic to support bandwidth-sensitive applications.

It supports multiple Service Set Identifiers (SSIDs) to enable you to segregate traffic for different departments, users, and communication devices.

The Cisco WAP321 is simple to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. Power over Ethernet (PoE) support makes the device easy to install without the need for separate power plugs or expensive new wiring.

To enhance reliability and safeguard sensitive business information data, the Cisco WAP321 supports Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. 802.1X RADIUS authentication helps keep unauthorized users out.

All Cisco products

All Wireless Access Points

WAP321 Features
General
Availability:	currently available
List price:	$310
LAN / WAN Connectivity
WAN ports:	0
LAN ports:	1
LAN ports type:	Gigabit Ethernet (RJ-45)
LAN ports auto cross-over:
Load Balancing:
Router
DHCP client:
Routing Protocols:	Spanning Tree Protocol (STP) VLAN tagging (802.1q)
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication SSID Broadcast disable
WiFi modes:	Access point Wireless bridge (PtP)
internal antenna(s):	1
Antenna gain:	2 dBi
Transmit Power:	+13 dBm
Receiver Sensitivity:	-71 dBm
Multiple SSID:
WDS compatible:
WMM (QoS):
WMM-PS (QoS):
WPS (Wi-Fi Protected Setup):
Device Management
Default IP address:	192.168.1.245
Default admin username:	cisco
Default admin password:	cisco
Administration:	Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI SSH
Firmware upgradeable:
Email alerts:
Event log:
Diagnostic functions:
Misc hardware info
SNMP support:	SNMP v.3
NTP client:
Power over Ethernet (PoE):
Links
Product page:	http://www.cisco.com/en/US/products/ps12...
Datasheet:	http://www.cisco.com/en/US/prod/collater...
Manual:	http://www.cisco.com/en/US/docs/wireless...
Quick Install Guide:	http://www.cisco.com/en/US/docs/wireless...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

User Reviews/Comments:

rate: avg:

by Techman - 2014-08-01 09:40

Very nice!