main shortcuts
|
 |
Cisco RV180W
|
| details: | Wireless-N Multifunction VPN Router |
| hardware type: | Wireless Router |
| date added: | 2012-04-12 |
| updated: | 2012-08-21 |
The Cisco RV180W Multifunction VPN Router delivers highly secure broadband connectivity, high-speed wireless networking, and remote access for multiple offices and remote workers.
The Cisco RV180W features a built-in 4-port Gigabit Ethernet managed switch that lets you connect network devices and transfer files and data at high speed, providing the power and performance you need to keep multiple employees productive. Intelligent quality of service (QoS) features let you prioritize network traffic to keep critical network applications like voice and video running at their best.
The Cisco RV180W also includes support for wireless-N technology. This multifunction device can serve either as a wireless router, wireless access point, wireless bridge, or repeater, providing investment protection and flexibility when business needs change.
| RV180W Features |
| General
|
| Availability: |
currently available
|
| List price: |
$246 |
| LAN / WAN Connectivity
|
| WAN throughput: |
800 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
|
| external antenna(s): |
2 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+15 dBm |
| Receiver Sensitivity: |
-71 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit)
|
| VPN Encryption: |
3DES (168-bit)
|
| |
IPSec |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: |
10 |
| IPSec throughput: |
50 Mbps |
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| PPTP simultaneous tunnels: |
10 |
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, Proxy, Java, ActiveX, Cookie
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Diagnostic functions: |
Ping, Traceroute and DNS Lookup |
| Misc hardware info
|
| SNMP support: |
SNMP v.3
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.cisco.com/en/US/products/ps11... |
| Datasheet: |
http://www.cisco.com/en/US/prod/collater... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
