Shortcuts
|
|
Buffalo WBMR-HP-G300H
|
details: | AirStation Nfiniti High Power Gigabit ADSL2+ Router |
hardware type: | DSL Wireless Router |
date added: | 2013-07-18 |
updated: | 2015-01-27 |
Powered by Wireless-N technology, this ADSL2+ router offers better coverage and supports four Gigabit ports for maximum speed. It also supports downstream rates of 24Mbps and upstream rates of 3Mbps. Supported wi-fi speeds are up to 300Mbps.
The router comes with a USB port that can be used to attach and share a network storage device or USB hard disk, or to connect a USB multi-function printer. The USB port also supports powered USB 2.0 for up to four port hubs.
The Buffalo AirStation One-Touch Secure System (AOSS) and Wi-Fi Protected Setup (WPS) make it very easy to set up a secure, wireless connection. The router supports multiple levels of wireless and wired security: WPA2, WPA-PSK (TKIP, AES) and 128/64-bit WEP.
WBMR-HP-G300H Features |
General
|
Availability: |
currently available
|
Street price: |
$135 |
Warranty: |
3 year(s) |
LAN / WAN Connectivity
|
WAN throughput: |
24 Mbps |
WAN throughput upstream: |
3 Mbps |
WAN ports: |
1 |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 for printers and storage devices |
USB port type: |
USB 2.0
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
QoS: |
|
UPnP: |
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5)
|
PPPoE client: |
|
PPPoA client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
WiFi modes: |
Access point
|
external antenna(s): |
2 |
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
Device Management
|
Default IP address: |
192.168.11.1 |
Default admin username: |
root |
Default admin password: |
(blank) |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Diagnostic functions: |
ping |
Misc hardware info
|
NTP client: |
|
Print Server: |
|
Links
|
Product page: |
http://www.buffalo-technology.com/produc... |
Datasheet: |
http://www.buffalo-technology.com/userfi... |
Manual: |
http://www.buffalo-technology.com/downlo... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|