Shortcuts
|
|
Billion BiPAC 7700NR2
|
details: | 300Mbps 802.11n Wireless ADSL2+ Router |
hardware type: | DSL Wireless Router |
date added: | 2012-11-27 |
updated: | 2013-05-26 |
The BiPAC 7700NR2 is compliant with worldwide ADSL standards, and supports download rates of up to 12/24Mbps using ADSL2/2+, 8Mbps using ADSL and an upload rate of up to 1Mbps. The integrated Annex M standard supports ADSL2/2+ for higher uploads by doubling the upload data rate.
Utilizing the benefits of Wireless N technology, BiPAC 7700NR2 performs faster file transfers and farther coverage enabling greater wireless signals across your home. If the network requires wider coverage, the built-in Wireless Distribution System (WDS) repeater function allows users to expand the wireless network without the need for any external wires or cables.
Quality of Service (QoS) gives full control over outgoing data traffic. Priority can be assigned by the router to ensure that important transmissions like gaming packets, VoIP calls or IPTV / streaming content passes through the router at lightning speed, even when there is heavy Internet traffic.
The VLAN support is also capable of establishing reliable high-speed transmissions for wide bandwidth applications such as IPTV, VOD, or online gaming without consuming bandwidth.
BiPAC 7700NR2 Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN throughput: |
24 Mbps |
WAN throughput upstream: |
1 Mbps |
WAN ports: |
1 |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
Dynamic DNS client: |
|
QoS: |
|
ToS / DiffServ: |
|
UPnP: |
|
Routing Protocols: |
VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M)
|
PPPoE client: |
|
PPPoA client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
WiFi modes: |
Access point Repeater mode
|
external antenna(s): |
2 |
ext antenna(s) removable ?: |
|
Antenna gain: |
2 dBi |
WDS compatible: |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
|
Device Management
|
Default IP address: |
192.168.1.254 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI
|
Firmware upgradeable: |
|
Event log: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2
|
Links
|
Product page: |
http://au.billion.com/products/wireless/... |
Datasheet: |
http://au.billion.com/downloads/datashee... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|