The Broadband Guide
SG
search advanced

Billion BiPAC 7100G

details: 802.11g VPN ADSL Modem/Router
Wireless, VPN, Firewall
hardware type: DSL Wireless Router
date added: 2007-07-15
updated: 2013-05-26
The BiPAC 7100G is an ADSL wireless router with one RJ-11 WAN port and four 10/100Mbps LAN ports. It supports NAT routing, DMZ and UPnP.

The integrated access point complies with the IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA wireless encryption.

This router provides VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to 4 simultaneous VPN tunnels. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 BiPAC 7100G Features
 General
 Availability: discontinued
 Warranty: 2 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 DHCP server: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: no
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
 WiFi modes: Access point
 internal antenna(s): 0
 external antenna(s): 1
 ext antenna(s) removable ?: no
 Default SSID: wlan-ap
 Multiple SSID: no
 WDS compatible: no
 VPN
 RADIUS support: no
  IPSec
 IPSec server: yes
 IPSec client: yes
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 4
  L2TP
 L2TP server: no
 L2TP client: no
 L2TP passthrough: yes
  PPTP
 PPTP server: no
 PPTP client: no
 PPTP passthrough: yes
 PPTP simultaneous tunnels: 0
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Security log: yes
 Filtering: Domain/URL blocking, MAC Address filtering, packet filtering, keyword/content filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Event log: yes
 Misc hardware info
 Chipset: Conexant CX82310
 SNMP support: SNMP v.1
 NTP client: yes
 Power over Ethernet (PoE): no
 Links
 Product page: http://www.billion.com/
 Datasheet: http://www.billion.com/_Internet/datashe...
 Manual: http://www.billion.com/_Internet/userman...
 Quick Install Guide: http://www.billion.com/_Internet/qsg/BIP...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About