F5D8235-4 Features |
General
|
Availability: |
discontinued
|
List price: |
$119 |
Street price: |
$75 |
Warranty: |
1 year(s) |
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 flash drive, hard drive |
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
MAC Address clone: |
|
MTU configurable (WAN): |
|
DSL
|
PPPoE client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) SSID Broadcast disable
|
WiFi modes: |
Access point
|
external antenna(s): |
2 |
Default SSID: |
Belkin N+ Wireless |
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Security log: |
|
Filtering: |
MAC Address filtering
|
Device Management
|
Default IP address: |
192.168.2.1 |
Default admin password: |
(blank) |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Misc hardware info
|
Chipset: |
bcm4718, 480MHz |
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
NTP client: |
|
Third-party firmware support: |
DD-WRT |
Links
|
Product page: |
http://www.belkin.com/us/support-product... |
Manual: |
http://cache-www.belkin.com/support/dl/m... |