Aztech WL559E Wireless Range Extender

Shortcuts

	Aztech WL559E
details:	Wall-Plugged 300Mbps Wi-Fi Repeater
hardware type:	Wireless Range Extender
date added:	2012-11-23
updated:	2012-12-07

Aztech WL559E is a Wall-Plugged 300Mbps Wireless-N Repeater.

WL559E supports robust 802.11n technology with up to 300Mbps data transfer rate. The extender can take an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach.

The repeater is equipped with 1 x 10/100M Auto MDI/MDIx LAN port that can be used to connect to an existing wired network to serve as a wireless interface. It can also be used to configure the repeater via its web-based GUI, or upgrade the firmware.

WL559E supports WEP, WPA, and WPA2 to ensure wireless network security and prevent unauthorized access to you network.

The device is easy to setup. It is portable with no need of any external power adaptor. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.

All Aztech products

All Wireless Range Extenders

WL559E Features
General
Availability:	currently available
LAN / WAN Connectivity
WAN ports:	0
LAN ports:	1
LAN ports type:	10/100 Base-TX (RJ-45)
LAN ports auto cross-over:
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES)
WiFi modes:	Repeater mode
internal antenna(s):	2
WPS (Wi-Fi Protected Setup):
Device Management
Administration:	Web-based (LAN)
Firmware upgradeable:
Misc hardware info
Chipset:	Ralink RT3352
RAM:	64 Mb
Flash Memory:	4 Mb
Links
Product page:	http://www.aztech.com/prod_repeater_wl55...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

User Reviews/Comments:

rate: avg:

by densciple - 2013-04-23 05:57

... please check for different router connections because i am finding hard time to fix... and hope when logging in to its default ip 10.0.10.254 it will not detect or scan immediately the WiFi's connection...
I am looking forward for new Firmware update ... thank you!

by densciple - 2013-04-23 06:01

I am having problem to use the Aztech WL559E ...
1. When i log in ... 10.0.10.254 ---- scan automatically all the wifi availability then it does not detect any but when i use WPS it detects but the problem was it disconnects after 2 second connection.
2. Using AP i can see the name of the SSID and i did not set any password but when i connect my ipad it says UNABLE to connect. (directly connected to modem)

by PK - 2015-02-17 23:31

i have problem when enter http://10.0.10.254, it can't find the site what is the new IPaddress should be??? I have changed a new modem and need to change the setting.

by Rehan Azmi - 2016-10-04 06:51

i have problem when enter http://10.0.10.254, it can't find the site w

by Rehan Azmi - 2016-10-04 06:53

i have problem when enter http://10.0.10.254, it can't find the site what is the new IPaddress should be??? I have changed a new modem and need to change the setting.