The Broadband Guide
SG
search advanced

Aximcom X-116N

details: Bandwidth Management Transformable Router
hardware type: Travel Router
date added: 2010-09-06
updated: 2014-09-22
The X-116N is a mobile wireless router, providing downstream speeds of up to 99Mbps. It has one USB 2.0 port intended for connection of 3G/4G USB modem, printers or storage devices. The router supports HSDPA/HSUPA/EVDO/TD-CDMA/UMTS/GPRS mobile standards.

The integrated AP complies with IEEE 802.11n standard, providing wireless transmission speeds of up to 300Mbps. It is WDS compatible and supports Multiple SSIDs.

The X-116N has a built-in BT download engine, allowing you to download files directly to the USB HDD. It also has a built-in Samba, FTP and SCSI server.

The router provides VPN pass-through for IPSec and PPTP, allowing you to establish up to 16 simultaneous IPSec tunnels. A built-in SPI firewall protects the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 X-116N Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 99 Mbps
 WAN ports: 1
one USB port for 3G/4G USB modem
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for 3G/4G USB modem and storage devices
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 UPnP: yes
 MAC Address clone: yes
 Routing Protocols: Spanning Tree Protocol (STP)
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
 WiFi modes: Access point
Repeater mode
 external antenna(s): 2
 Multiple SSID: yes
 WDS compatible: yes
 VPN
  IPSec
 IPSec server: yes
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 16
  PPTP
 PPTP server: yes
 PPTP passthrough: yes
 PPTP simultaneous tunnels: 4
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.1.1:8080
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 Chipset: MIPS24K
 RAM: 64 Mb
 Flash Memory: 8 Mb
 NTP client: yes
 Links
 Product page: http://www.aximcom.com/en/

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About