Shortcuts
|
|
Aximcom X-105NL
|
details: | Wireless Mobile Router |
hardware type: | Travel Router |
date added: | 2010-09-06 |
updated: | 2015-01-30 |
The X-105NL is a mobile wireless router, providing mobile broadband speeds of up to 42Mbps. It has one USB 2.0 port intended for connection of 3G/4G USB modem, printers or storage devices. The router supports HSDPA/HSUPA/EVDO/TD-CDMA/UMTS/GPRS mobile standards.
The integrated AP complies with IEEE 802.11n (draft) standard, providing wireless transmission speeds of up to 150Mbps. It is WDS compatible and supports Multiple SSIDs.
The X-105NL has a built-in BT download engine, allowing you to download files directly to the USB HDD. It also has a built-in Samba, FTP and SCSI server.
The router provides VPN pass-through for IPSec and PPTP. A built-in SPI firewall protects the network against hackers and Denial of Service (DoS) attacks.
X-105NL Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN throughput: |
42 Mbps |
WAN ports: |
1 one USB port for 3G/4G USB modem |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 for 3G/4G USB modem and storage devices |
USB port type: |
USB 2.0
|
Auto-failover connection: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
Dynamic DNS client: |
|
UPnP: |
|
MAC Address clone: |
|
Routing Protocols: |
Spanning Tree Protocol (STP)
|
Wireless
|
Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
WiFi modes: |
Access point Repeater mode
|
external antenna(s): |
1 |
Multiple SSID: |
|
WDS compatible: |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking
|
Device Management
|
Default IP address: |
192.168.1.1:8080 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Diagnostic functions: |
ping, traceroute |
Misc hardware info
|
Chipset: |
MIPS24K |
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
NTP client: |
|
Print Server: |
|
Links
|
Product page: |
http://www.aximcom.com/en/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|