VR-105N Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
Dynamic DNS client: |
|
UPnP: |
|
Routing Protocols: |
Spanning Tree Protocol (STP)
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Repeater mode
|
external antenna(s): |
1 |
Antenna gain: |
2 dBi |
Transmit Power: |
+4 dBm |
Receiver Sensitivity: |
-76 dBm |
Multiple SSID: |
|
WDS compatible: |
|
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit)
|
VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit), IPSec ESP (RFC 2406)
|
|
IPSec |
IPSec server: |
|
IPSec passthrough: |
|
IPSec simultaneous tunnels: |
25 |
|
L2TP |
L2TP server: |
|
L2TP passthrough: |
|
|
PPTP |
PPTP server: |
|
PPTP passthrough: |
|
PPTP simultaneous tunnels: |
10 |
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Device Management
|
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Diagnostic functions: |
ping |
Misc hardware info
|
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
NTP client: |
|
Links
|
Product page: |
http://www.aximcom.com/en/ |