The Broadband Guide
SG
search advanced

Arris WTM652

details: 802.11b/g Wireless VoIP Gateway
hardware type: VoIP Gateway
date added: 2009-10-15
updated: 2020-04-07
The WTM652 integrates a cable modem, 802.11b/g wireless access point, four-port 10/100 Ethernet switch and two FXS ports for VoIP. This router features integrated power sypply.

The integrated wireless access point supports 802.11b/g standards, providing wireless transmission rates of up to 54Mbps. It supports WEP and WPA wireless encryption. It can operate in wireless bridge mode, as well.

This router supports VPN pass-through for PPTP, L2TP and IPSec. A built-in SPI firewall protects the network against Denial of Service (DoS) attacks.
 
 
 
 WTM652 Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 51 Mbps
 WAN ports: 1
 WAN port(s) type: Coax F-connector
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 RJ-11 FXS VoIP phone ports: 2
 Router
 NAT routing: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 MAC Address clone: yes
 Routing Protocols: VLAN tagging (802.1q)
 Cable Modem
 DOCSIS compliance: DOCSIS 2.0
EuroDOCSIS 2.0
 PacketCable: PacketCable 1.0/1.1 (VoIP)
PacketCable 1.5 (VoIP)
 VoIP
 VoIP Protocols: SIP v2 (RFC 3261)
T.38 (Fax over IP)
 VoIP Audio Codecs: G.711 (PCM)
G.726
G.728
G.729e
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless bridge (PtP)
 Transmit Power: +16 dBm
 Receiver Sensitivity: -74 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Security log: yes
 Filtering: Domain/URL blocking, MAC Address filtering
 Device Management
 Default IP address: 192.168.2.1
 Default admin username: n/a
 Default admin password: blank
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Links
 Product page: https://www.commscope.com/
 Manual: http://www.speedguide.net/images/hardwar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About