Arris SBR-AC1900P Wireless Router

Shortcuts

	Arris SBR-AC1900P
details:	SURFboard Wi-Fi Router with RipCurrent G.hn Technology
hardware type:	Wireless Router
date added:	2016-05-15
updated:	2017-01-29

The SURFboard SBR-AC1900P Wi-Fi Router provides four Ethernet connections for use as the hub of your home/office Local Area Network (LAN). It also provides 802.11a/b/g/n/ac 2.4/5 Ghz dual-band concurrent wireless connectivity for enhanced mobility and versatility.

The SBR-AC1900P uses the power cable connected to the Wi-Fi Router to connect to the power lines that already exist in your home. RipCurrent is based on G.hn Power Line Communication (PLC), which is an ITU Specification managed by the HomeGrid Forum.

This technology allows the SBR-AC1900P to distribute all data to each of the AC power outlets in the home. With a corresponding G.hn Extender, the Wi-Fi or wired network can be extended to any room, including basements, garages, or far reaching bedrooms.

The router supports up to 15 connected power line extenders.

A USB 3.0 port and a USB 2.0 port allow for data and media storage or transfer and print sharing.

All Arris products

All Wireless Routers

SBR-AC1900P Features
General
Availability:	currently available
Street price:	$199
LAN / WAN Connectivity
WAN ports:	1
WAN port(s) type:	Gigabit Ethernet (RJ-45)
WAN port auto cross-over:
LAN ports:	4
LAN ports type:	Gigabit Ethernet (RJ-45)
LAN ports auto cross-over:
USB port(s):	2 one of the USB ports is USB 3.0 (for printers, storage devices and device charging)
USB port type:	USB 2.0
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
Dynamic DNS client:
UPnP:
Wireless
Maximum Wireless Speed:	1900 Mbps (Wi-Fi 5)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
WiFi modes:	Access point
internal antenna(s):	6
Multiple SSID:
WMM (QoS):
WPS (Wi-Fi Protected Setup):
Beamforming:
Dual Band (2.4GHz/5GHz):
Simultaneous Dual Band (2.4GHz/5GHz):
VPN
	IPSec
IPSec passthrough:
	PPTP
PPTP passthrough:
Device Management
Alternate Admin URL:	http://mysurfboard.local
Default admin username:	admin
Default admin password:	password
Administration:	Web-based (LAN) Remote configuration (WAN)
Firmware upgradeable:
Configuration backup/restore:
Event log:
Misc hardware info
IPv6 support:
Print Server:
Links
Product page:	http://www.surfboard.com/products/sbr-ac...
Datasheet:	http://speedguide.net/images/hardware/ar...
Manual:	http://speedguide.net/images/hardware/ar...
Quick Install Guide:	http://speedguide.net/images/hardware/ar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: