| Q1000H Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
An additional Gigabit Ethernet WAN port |
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| HomePNA: |
HPNA 3.1 (up to 320Mbps)
|
| USB port(s): |
1
client PC |
| Router
|
| NAT routing: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| MAC Address clone: |
|
| Routing Protocols: |
IGMP Multicast (RFC 1112)
|
| DSL
|
| DSL compliance: |
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
VDSL (G.993.1)
|
| PPPoE client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
|
| Wifi security/authentication: |
WEP
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
|
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, keyword/content filtering, date/time scheduling
|
| Device Management
|
| Default IP address: |
192.168.0.1 |
| Default admin username: |
admin |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| RAM: |
64 Mb |
| Flash Memory: |
32 Mb |
| Links
|
| Product page: |
http://www.actiontec.com/ |
| Datasheet: |
http://www.actiontec.com/products/datash... |
