SG Broadband Community

Originally posted by TradeMark245
"Hello, Base!! I'm alone in a forest and everyone is Dead!!" "Hello, Base!! Why can't they hear me?"

Do they really expect me to make it out of that level alive with all those damn snipers out there?

Yeah!!! I made it out of that forest. I ran to the right ...

Originally posted by Marcelleander
Thanx man but I still get the best with 10220. according to the tcp/ip analyser I am limmited to 40kb/sec at 500ms. what does that mean because i have downloadsspeeds up to 170 kb/sec.


Greetz,

Marcel

The 500ms is example of Slow or Peak internet times ...

I D/L this game and have played it too. I am now doing the Single Missions because in the Campaign mode I got about 3-4 leves into the game and then "Hello, Base!! I'm alone in a forest and everyone is Dead!!" "Hello, Base!! Why can't they hear me?"

Do they really expect me to make it out of that ...

Keep in mind the latest Worm Virus which attacked many systesm.

I believe some ISP's are still experiencing slow downs from purging their systems and the Netwrk Admins haven't tweaked them back up yet. :D

I haven't tested my new 811k down speed yet with some streaming media. I think I'll go watch ...

Hi.

I'm assuming that you do have the 640/90 Tim and you happen to live near one of the main routers. That's what usually gives you high speeds, but really Odd times/rates. Like sometimes it's fast and next month you may experience new speeds.

I think you need to keep the RcvWindow you posted last ...

Finally. I think I've got the best Rwin so far.

---
TCP options string = 020405ac01010402

MTU = 1492
MTU seems to be optimized for PPPoE... If you are not on a PPPoE connection, consider increasing your MTU to 1500 for optimal throughput.

MSS = 1452
Maximum useful data in each packet = 1452 ...

I'm just wondering how this Windowsize would work for you?

286160

I worked this one out from your MSS. (1460 * 7) * 4 = 286160
Let me know if it's any good for you.

Then if that is no good. Go back to:

10220

I have another suggestion. This is used for RasPPPoE but it might work in any situation. If you use DSL then you should remove the TCP/IP protocal Binded to the NIC. Only remove the TCP/IP for the NIC. Do not remove the DialUpAdapter tcp/ip Ever....

Removing the tcp/ip for the NIC will speed up ...

Here I changed my RcvWindow size to 30492. Anything higher brings down my speed right now. I tried 37752 but it was a bit too high for me. My provider says my LINE is 1.2Meg. But most only will get 900k streaming.

---
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Win 9x 4.90; SYMPA ...

Originally posted by timmy1079
yep, thanks

for this on really slow


Default Receive Window (RWIN) = 24684
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 24684
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale ...

Now post the Always on Connection for Win2000 that's what Tim has.

Remember, always backup your registry before making any changes. If you don't know to edit registry then ask someone who knows.

I turned my PMTU Discovery on. I haven't changed my Windowsize.

----
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Win 9x 4.90; SYMPA)

TCP options string = 020405ac01010402

MTU = 1492
MTU seems to be optimized for PPPoE... If you are not on a PPPoE connection, consider increasing ...

Originally posted by timmy1079
don't know why but, connection seem really fast but when i upload something, bar indicate finish uploading but it stuck there for like 30 secs and then upload a new file
what wrong?
and computer seem more slower than before i install rasppoe
:( :confused:

It's ok ...

Have you done a Speed test with your latest post????

Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms


It looks good except for the MTU size. Uh. I don't know win2000.

Have you read the whole page about ...

Doh!

Hmmm... ok I'm no help on this one. You have WIN98SE I think and I don't. The Registry is different from WinME that's what I have.

Ok someone else take over.

Timmy did you previously have a modem installed in your computer? And then upgraded to the DSL?

Sorry my bad. I forgot that the RecieveWindowLimits is just calculated as a constant. It doesn't actually reflect the Speeds you are getting. TCP/IP is NOT a speed tester! I get it now.

Originally posted by timmy1079
i have Verizon dsl

Do you use thier software? Access Manager or something like that? Their is another alternative but first How do you connect?

Default Receive Window (RWIN) = 65535

This is what your want right? for you cable. The speeds are good. Why not use this setting. Get yourself back there.

Originally posted by timmy1079
**Output was here***


is this a good setting?
what other thing can i do? thanks

Always remember to include What type of Line you have Cable/DSL and what connects you.

I'm willing to help DSL people.

Yeah, good point. I don't think it uses any bits to do that does it?

Registry tweaks. For advanced users here. We need to do some NetTrans cleaning for DSL home and Network computers. ;)

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetTrans

look at some of them. they're not being used. Back up your Registry and remove un-needed log entries. I had 17 ...

Originally posted by ExtraSweetCrispy
Repost this in the Tweaking forum please. Me and Lobo will helpy you out there..

My bad.

I'll make a new tread.

Oh yeah, forgot to mention this change that I also made to my reg. I'm trying to be thorough here as there seems to be alot of people getting 1500MTU when it's not set to that.

Look at this Key in your registry:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Net\0001\Ndi\params\IPMTU ...

I have always used another website for doing all my tweaks. DSLReports is pretty good. But now you guys have more cool things and well you are just different. They offer other things you don't and vice versa. So I'll be coming by here more often now.

Well, I have done the best I can and have added ...

Well, it's looking good so far.

----
TCP options string = 020405ac01010402

MTU = 1492
MTU seems to be optimized for PPPoE... If you are not on a PPPoE connection, consider increasing your MTU to 1500 for optimal throughput.

MSS = 1452
Maximum useful data in each packet = 1452, which is equal ...

Ok... I'm running on WinME, 128MegRAM, NVIDIA TNT2 vid card, 8GigHD, internet Sympatico.ca DSL external modem running on RASPPPoE connection. need more info let me know.

Here is my results after I made some changes to my registry. Sorry I don't have my previous results showing the 1500MTU size ...